Programmable Power Offers New Asterion AC Power Sources

2017年09月19日, 水曜日

New Asterion™ 3kVA High-Power AC Sources Offer High-Power Density and Touch Screen Simplicity

SAN DIEGO – AMETEK Programmable Power, the global leader in programmable AC and DC power test solutions manufacturing such brands as California Instruments™, Sorensen™ and Elgar™ (www.programmablepower.com), has added three new models to its Asterion™ line of AC/DC power sources.

The Asterion 1503 supplies up to 1,500 VA or 1,500 W; the Asterion 2253 supplies up to 2,250 VA or 2,250 W; and the Asterion 3003 supplies up to 3,000 VA or 3,000 W. All three units come in a 2U enclosure, and in both single and three phase models.

Like the lower-power 1U Asterion AC units, the Asterion Models 1503, 2253, and 3003 offer users a compelling combination of intelligence, performance, and modularity that make them the most adaptable and affordable platform available today.

The key to Asterion’s outstanding performance is AMETEK’s iX2™ current-doubling technology. With iX2, as the output voltage decreases from the maximum value to one-half the maximum value, the available output current increases up to two times the rated output current.

This allows Asterion to maintain maximum power through the widest range of voltages. As a result, iX2 current-doubling technology eliminates the need to buy multiple sources or overpowered sources to run tests at different voltage levels, such as when performing low line voltage testing.

Other unique Asterion benefits include Auto-Paralleling and Clock/Lock. With auto-paralleling, users can combine up to six units to achieve 18,000 VA of output power. One unit becomes the master while the rest serve as auxiliary units. The clock/lock feature allows users to easily configure multi-phase systems, such as split-phase, three-phase, or even higher phase count systems.

This allows users to purchase only the power they need today and then easily add more power and/or phases later as required. That scalability, along with the ability to expand easily as required, helps protect the value of the user’s initial investment and allows additional capital spending to be deferred until needed.

While these features are impressive, equally impressive are Asterion's analog specifications. Asterion offers wide AC and DC output voltage ranges up to 400 Vac and 500 Vdc. Load and line regulation are +/-0.025% and +/-0.015%, respectively. This makes the Asterion more versatile and accurate than most other AC power sources available today.

In addition, test engineers will appreciate the Asterion AC source’s ease of use. AMETEK developed an entirely new user interface for this platform. The intuitive, touch-screen interface, not found on other AC sources, allows users to quickly and easily set up the source and run tests. The Asterion offers a complete avionics test suite as an option, with a programmable frequency between 16Hz and 5,500Hz.

This powerful set of features allows Asterion to be used in both the lab and in ATE systems. If the Asterion is used as part of an ATE system, test engineers can order it without a front panel, which offers significant savings.

Asterion comes with standard LAN, USB, and RS-232 interfaces, and an optional GPIB interface is also available. Intuitive Virtual Panels control GUI software comes bundled with the instrument for easy remote control from a computer. Included drivers allow test engineers to quickly integrate the unit into ATE systems.

For More Information
To learn more about AMETEK programmable power supplies and programmable electronic loads, contact AMETEK Programmable Power Sales toll free at 800-733-5427, or 858-458-0223, or by email at sales.ppd@ametek.com. Information also is available from an authorized AMETEK Programmable Power sales representatives, who can be located by visiting http://www.programmablepower.com/contact.

Tweet This
@prog_power adds higher power models to its Asterion line, allowing this affordable platform to be used in even more applications. http://www.programmablepower.com/ac-power-source/AsterionAC-1U/Overview.htm

AMETEK Programmable Power designs, manufactures and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. It offers one of the industry’s broadest portfolios of programmable power products under the California Instruments, Sorensen, and Elgar brands.

AMETEK Programmable Power is a business unit of the AMETEK Electronic Instruments Group, a leader in advanced instruments for the process, aerospace, power, and industrial markets and a division of AMETEK, Inc., a leading global manufacturer of electronic instruments and electromechanical devices with 2016 annual sales of approximately $4.0 billion.

Media Contact:
Craig Frahm
Tel: (858) 678-4459, e-mail: craig.frahm@ametek.com
Website: www.programmablepower.com